Quartz wall clocks generally have problems such as not walking, stopping, and slow walking. We all know that such problems must be the failure of the quartz clock movement inside the wall clock. So, how should you check for the quartz clock movement failure? The editor of Hengrong Watch Manufacturer personally believes that it is divided into 4 steps to troubleshoot the above faults of the quartz clock movement. If you have better inspection skills and methods, please don’t be stingy with your sharing!

1.First check whether the battery is good from the external primary battery and whether the positive and negative ends of the shrapnel of the quartz clock movement battery tank are connected well. 2. Remove the back cover of the quartz clock movement to confirm whether the positive and negative poles of the power supply shrapnel are connected well with the coil circuit board. Then you can also remove the three gears with magnet gears. Check the gears you left behind. No rotation. 3. Determine whether there are any debris on the gears of the quartz clock movement and that the gear shaft is not bent due to misalignment. Also, pay attention to whether the lower gear shaft is lacking. If there is no oil, add a little bit of special lubricating oil for the quartz clock movement or add some sewing joints. Machine lubricating oil. 4. If the quartz clock movement of the wall clock is installed by itself, you must select the clock hand according to the load capacity of the quartz clock movement. When installing the clock hand, make sure that the clock hand has no collision or friction, and also pay attention to the second hand when installing the second hand. Don't bend the second axis of the quartz clock movement too much.